Skip to product information
UT SERIES · AVAILABLE NOW
Heat-Shrink Rod Handle Grip Tubing, 15–50 mm (0.6–2 in)
$2.58
Specifications
Product specifications
Available options
| Color | Black · Yellow · Blue · Red · Green |
|---|---|
| Diameter | 15 mm (0.59 in) · 18 mm (0.71 in) · 20 mm (0.79 in) · 22 mm (0.87 in) · 25 mm (0.98 in) · 28 mm (1.10 in) · 30 mm (1.18 in) · 35 mm (1.38 in) · 40 mm (1.57 in) · 45 mm (1.77 in) · 50 mm (1.97 in) |
| Length | 1 m (39 in) · 20 cm (7.9 in) Trial Piece |
Product Details
| Type | Heat Shrink Fishing Rod Handle Grip |
|---|---|
| Features | Non-slip, wear-resistant, comfortable grip, electrical insulation |
| Installation | Boiling water heat shrink |
| Colors | Red, Yellow, Green, Blue, Black |
| Product Name | Non-slip Heat Shrink Tubing |
| Material | Irradiated cross-linked polyethylene |
| Environmental Standard | RoHS compliant |
| Initial Shrink Temp | 60°C |
| Shrink Ratio | 1.7:1 |
| Final Shrink Temp | 105°C |
| Applications | High-end fishing tackle, sports gear, electrician tools, kitchen utensil handles |
Performance Specifications
| Performance Property | Parameter Value |
|---|---|
| Tensile Strength | ≥ 8.0 MPa |
| Axial Shrinkage | ≤ ±8% |
| Final Shrinkage Temperature | ≤ 110°C |
| Insulation Performance | ≥ 10 kV/mm |
Dimensions
| Diameter | Before Heat Shrink - Inside Diameter (mm) | Before Heat Shrink - Wall Thickness (mm) | After Heat Shrink - Inside Diameter (mm) | After Heat Shrink - Wall Thickness (mm) | Standard Package Length |
|---|---|---|---|---|---|
| Φ20 | ≥ 20 | 0.5 ± 0.15 | ≤ 11.0 | 0.90 ± 0.15 | 1.0 m |
| Φ22 | ≥ 22 | 0.5 ± 0.15 | ≤ 12.5 | 0.90 ± 0.15 | 1.0 m |
| Φ25 | ≥ 25 | 0.5 ± 0.15 | ≤ 14.5 | 1.00 ± 0.15 | 1.0 m |
| Φ28 | ≥ 28 | 0.5 ± 0.15 | ≤ 15.5 | 1.00 ± 0.15 | 1.0 m |
| Φ30 | ≥ 30 | 0.6 ± 0.15 | ≤ 17.5 | 1.20 ± 0.15 | 1.0 m |
| Φ35 | ≥ 35 | 0.6 ± 0.15 | ≤ 20.0 | 1.20 ± 0.15 | 1.0 m |
Note: Manual measurements may have slight variations due to different production batches, thank you for understanding.
Heat Shrink Non-Slip Fishing Rod Handle Grip Sleeve
- Features comfortable grip, non-slip, wear-resistant, easy installation, and electrical insulation
- Easily installs by pouring boiling water over it
- Available in 5 colors: Red, Yellow, Green, Blue, Black
Heat Shrink Tight Fit
- Easy installation: heat shrink wrap tightly fits around the rod grip.
- Recommended heating methods: High-power heat gun, 100°C boiling water, or gas stove (keep a safe distance above the flame to avoid burning).
Comfortable Grip, Non-Slip & Anti-Static
- Irradiated cross-linked polyethylene material for safer insulation
- Features non-slip textured finish for enhanced grip
Built-in Rod Stop Feature
- Roll the edge backward to create an integrated rod stop
- Provides a clean look and enhanced practical usability
High Strength & Flexibility
- Soft, stretch-resistant, and highly durable material
- Made of non-toxic, eco-friendly premium material
- Provides excellent anti-slip performance
Easy Cut and Ready to Use
- Can be used for 2–4 fishing rods
- Cut to custom length based on your needs
Product Specifications
- Non-slip heat shrink tubing for fishing rod grips and tool handles
- Measurement Note: Tubing diameter is measured when rounded. Flattened width equals half of the outer perimeter (Perimeter = Diameter × 3.14).
Heat Shrink Tubing Specifications
- Note: Manual measurements may have slight variations due to different production batches.
Multiple Colors Available
- Stylish textured design in red, yellow, green, black, and blue options to meet your needs
Usage Method
- 1. Measure handle length and cut, leaving an extra 3–5 cm to create the rod stopper.
- 2. Slide the sleeve on from the bottom of the handle and adjust to the appropriate position.
- 3. Use a heat gun or boiling water to shrink the sleeve completely so it adheres tightly.
- 4. Roll back the extra front portion to serve as a rod stopper.